Yamaha Ro8-D Ri8-D/Ro8-D Firmware Update Guide V3.10 or older - Page 3

■ Preparing for the update You will need the following items ready to execute the update procedure. ● A Windows computer equipped with the following conditions: OS Windows 8/8.1 /Pro Windows 7 Ultimate / Professional / Home Premium CPU Intel Pentium 1.2GHz or Intel Celeron 1.7GHz or higher HDD 250MB or more Connector An Ethernet connector that supports a data transfer rate of 100Mbps or higher ● An Ethernet cable (CAT5e or higher recommended. Straight or cross.) ● The Ri/Ro firmware Download the latest firmware from the following URL. http://www.yamahaproaudio.com/downloads/ ● The Dante firmware update program Download the latest program from the following URL. http://www.yamahaproaudio.com/downloads/ ■ Update procedure sequence Update each firmware component in the following sequence. To update more than one Ri/Ro unit, configure "Computer TCP/IP setting (for Ri/Ro unit)" and perform "Updating the Ri/Ro firmware" one by one. Then, configure "Computer TCP/IP setting (for Dante)" and perform "Dante firmware update" one by one. Install the Dante Firmware Update Manager Computer TCP/IP setting (for Ri/Ro unit) Updating the Ri/Ro firmware Computer TCP/IP setting (for Dante) Updating the Dante firmware If there are 2 computers, you may use one for Ri/Ro unit firmware update and the other for Dante firmware update so that you can perform the work without switching the TCP/IP settings. To update more than one Ri/Ro firmware application, it is recommended to use 2 computers for the update. 3