Yamaha SBS-100 SBS-100 Owners Manual - Page 13
Adjusting the volume level of each channel (CH LEVEL)
View all Yamaha SBS-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Adjusting the volume level of each channel (CH LEVEL) The surround effect is achieved using six channels (audio outputs) of the unit. While listening to a series of test-tones from the unit, you can adjust the volume level of each channel to balance the sound heard from your listening position. (Volume level adjustment of each channel is not available when the unit is in stereo playback mode.) 1 Hold down the CH LEVEL key on the remote control for more than 3 seconds. The STATUS indicator flashes in green during test-tone output. The test-tone cycles through the channels in the order below. The test-tone is output from each channel in turn for two seconds. You can confirm which channel is playing the testtone by the way the indicators flash. Test-tone flow Front (left) 2 While the test-tone is output from the channel to be adjusted, press the SUBWOOFER key (+ or -) to balance the volume level with the other channels. During volume adjustment, the cycle of the test tone stops. When you have finished adjusting the current channel level, release the + or - key and wait a moment for the test-tone cycle to resume. You can check the volume level by the indicator lights. 3 After adjustment is complete, press the CH LEVEL key again. The test-tone stops. HINT • Press the VOLUME key (+ or -) to adjust the overall volume while the test-tone is being played back. • When the SBS position setting is changed (p.10), the channel level setting will be overwritten. Center Front (right) Surround (right) Surround (left) Subwoofer Back to beginning En 11