Yamaha SPM-K30 Support Guide - Page 11

English INSTALLATION PROCEDURE 4 Attach the safety wire. Attach the safety wire to the small wall mount bracket to prevent the Digital Sound Projector from falling. Safety wire Slip one end through the loop at the other end Slip the safety wire between the bracket and the projector Repeat the same procedure for the other bracket. 5 Mount the Digital Sound Projector on the wall. Fit the mounting guide hooks of the small wall mount brackets attached to the Digital Sound Projector into the holes on the left and right sides of the large wall mount bracket and then slide the unit to the right. Fit the hook into the hole. Slide the unit to the right. Note Hold the Digital Sound Projector tight with both hands when attaching or removing the Digital Sound Projector to or from the wall. Holding the Digital Sound Projector loosely could cause the Digital Sound Projector to fall, resulting in personal injury. En 7