Yamaha SRT-700 Owners Manual - Page 16
Setting the auto power standby function
View all Yamaha SRT-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Clearing all programmed functions 1 With the unit turned off, hold down the LEARN key on the unit's remote control for more than 3 seconds (for entering the learning mode). When the unit is in the learning mode, the indicators on the front panel flash as shown below. 2 Hold down INPUT on the front panel of the unit for more than 3 seconds. The corresponding indicator of the learned function turns off and the indicators on the front panel flash as shown below. Setting the auto power standby function By enabling the auto power standby function, you can avoid forgetting to turn off the unit after use, or if you fall asleep while watching TV. NOTE • When the auto power standby function is enabled and one of the following conditions is met, the unit will automatically turn off. − No operations for 8 hours − No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source. 1 With the unit turned off, hold down the MUTE key on the unit's remote control for more than 3 seconds to enable/disable the auto power standby function. You can check the status of the auto power standby function with the indicators on the front panel for several seconds right after the unit is turned on. If the clearing is completed, you will hear the bleep sound three times. 3 Press the LEARN key on the unit's remote control. Off (enabled), lights up (disabled) HINT • Initial setting varies depending on the country or region. − U.K. and Europe models: enabled − Other models: disabled 14 En