Yamaha SW10 Owner's Manual - Page 5

Specifications General specifications Type Bass Reflex Powered Speaker Frequency Range 25-150 Hz (-10 dB) Sensitivity 12 dB at Vol. Max (for 100 dB/SPL, 1 m on Axis) Maximum Output Level 111 dB (1 m on Axis) Dimensiones (W × H × D).......... 328 × 459 × 476 mm Weight 26 kg Speaker unit Speaker Unit 25 cm Cone (8Ω, magnetic shielded) Enclosure Type: Bass Reflex Amp.unit Maximum Output Power 180 W at 100 Hz, THD= 1%, RL= 8Ω Input Sensitivity/Impedance ....... -6 dB to +4 dB/10 kΩ (Input 1, 2, 3) Hum & Noise 60 dBu (Volume= Min) DIN Audio filter Signal to Noise Ratio 100 dB (IEC-A Weighting) Controls VOL (Level Control) CUTOFF FREQ. Control: 40-120 Hz (Variable) PHASE Switch: REV/NORM POWER Switch: ON/OFF Connectors Input 1, 2, 3 (XLR-3-31), Output 1, 2, 3 (XLR-3-32) Power Indicator/Clip Indicator ... Green/Red LED Power Requirement USA and Canada: AC 120 V, 60 Hz Europe: AC 230 V, 50 Hz Others: AC 240 V, 50 Hz Power Consumption 160 W Specifications and appearance are subject to change without notice. For European Model Purchaser/User Information specified in EN55103-1 and EN55103-2. Inrush Current: 11A Conformed Environment: E1, E2, E3 and E4 Dimensions H: 459 W: 328 6 407 D: 476 69 Unit: mm