Yamaha Soavo-2 Owner's Manual - Page 2

PLACING THE SPEAKERS Place the speakers on a sturdy, vibration-free surface, or on a well-built stand. ■ Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. Yamaha speaker stand SPS-900 (option) You can use this unit as a floor stand speaker when installing on an SPS-900. In this case, use screw holes on the bottom of this unit. • For details about installing, refer to the assembly instruction of SPS-900. Bottom view (Front side) 135 mm (5-5/16") Screw holes Diameter: 4 mm (5/32") Hole depth: 13 mm (1/2") ■ Using as front speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. Speaker layout image Soavo-2 Subwoofer Yamaha speaker stand SPS-900 Center Surround Note Placing this unit too close to a TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/8")) from the TV set. Notes • To avoid accidents resulting from tripping over loose speaker cables, fix them to the floor. • Do not fasten the speaker on the stand with nails or adhesives, etc. Long time use and vibrations may cause this unit to fall down. • Do not pinch the cables between the speaker and the stand. 2 En