Yamaha TF5 Quick Guide - Page 12
Connections - software
View all Yamaha TF5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
5. Connections 5-1 Connecting inputs Keyboard or synthesizer Electric guitar or bass Direct box Mic FC5 (optional) USB 2.0 Computer (DAW software) TF series Quick Guide - 12 - Default signal routing for each channel CHANNEL ANALOG INPUT TF5 TF3 CH 1 : CH 16 CH 17 : CH 24 CH 25 : CH 32 CH 33 : CH 40 ST IN 1L ST IN 1R ST IN 2L ST IN 2R INPUT 1 : INPUT 16 INPUT 17 : INPUT 24 INPUT 25 : INPUT 32 INPUT 1 : INPUT 8 ST IN 1L ST IN 1R ST IN 2L ST IN 2R INPUT 1 : INPUT 16 INPUT 17 : INPUT 24 INPUT 1 : INPUT 8 INPUT 9 : INPUT 16 ST IN 1L ST IN 1R ST IN 2L ST IN 2R TF1 INPUT 1 : INPUT 16 INPUT 1 : INPUT 8 INPUT 9 : INPUT 16 : ST IN 1L ST IN 1R ST IN 2L ST IN 2R Default signal routing for each channel is shown above. To change the signal routing, use the INPUT screen (page 18). HINT What if I'm using condenser mics? Phantom power must be supplied to condenser mics. Some direct boxes also need phantom power. When using phantom power, first set "+48V Master" on the SYSTEM SETUP screen to on, then turn phantom power on or off for each channel on the corresponding channel's INPUT screen. Make sure you turn phantom power off if it is not needed. For more details, refer to the Reference Manual. Why can't I hear anything? • Is the fader that corresponds to the desired INPUT jack raised? • Does the input select for each channel match each INPUT jack? • Is the channel's head amp gain set too low? • Is the channel's [ON] key pressed? • Is the channel muted?