Yamaha TF5 Quick Guide - Page 16

Controls and functions 6-8 FADER BANK section Allows you to quickly assign different channels to the console's faders. 6-10 SENDS ON FADER section Switches each channel strip to temporarily control the SEND LEVEL and SEND ON of the designated bus. ① ② 1 [INPUT1], [INPUT2] keys Allow you to change the channels that are assigned to the console's faders. The keys light to indicate which fader bank is currently selected. You can press the [INPUT1] and [INPUT2] keys at the same time to light both keys and display the GROUP BANK in the Channel Strip section. 2 [OUTPUT] key Displays the OUTPUT BANK in the Channel Strip section. You can press the [INPUT2] and [OUTPUT] keys at the same time to light both keys and display the CUSTOM FADER BANK in the Channel Strip section. 6-9 TAP section ① 1 [TAP] key Allows you to tap and set the delay time used for effects on FX1/FX2 and AUX9/10-AUX19/20. The key flashes in time with the tempo. The tempo you tap on the [TAP] key is applied to effects that have "Sync" set to "On". TF series Quick Guide ① - 16 - 1 [SENDS ON FADER] keys Press a key to set the corresponding bus to SENDS ON FADER mode. The key you pressed lights to indicate SENDS ON FADER mode is enabled. Press the key again to release SENDS ON FADER mode. 6-11 Display section Allows to you control the console by interacting with the graphic interface displayed on the touchscreen. You can also use the knobs to perform fine adjustments. You can dive further into various features by pressing the keys to display contextual menus. ① ② ③ ④ ⑤ ⑦ ⑥ 1 Display The display is a multitouch capable touchscreen that you can operate with your fingers. You can touch, double-touch, slide, swipe, and pinch in and out to interact with the items shown on the display.