Yamaha TX5n Owner's Manual - Page 9

Basic Operation of the TXn Panel Operations Encoder B Function buttons Encoder A [EXIT] button [HOME] button [ENTER] button About the Display Shows an alert message if a problem occurs or if a user-specified event occurs. Adjusting the Attenuator When the display shows the attenuator (i.e., in the HOME screen or the METER screen), you can use encoders A and B to adjust each channel's attenuation. NOTE • If the display shows a screen other than the HOME screen or METER screen, encoders A and B are used to set parameters. Shows the contents of the selected screen. Shows the names of the screens assigned to the function buttons. Switching Screens By pressing a function button you can move to the screen indicated above that button. By pressing the [HOME] button you can move to the HOME screen. By pressing the [EXIT] button you can move to the screen one level above. Editing the Parameters Use encoders A and B to move to the parameter that you want to edit, and use encoder B to edit the value. NOTE • When you edit a parameter in the UTILITY screen, press the [ENTER] button to confirm it after you finish editing. A parameter that has not been confirmed will flash. If you move the cursor or move to a different screen without confirming the parameter, your change will not be applied. Attenuator Displaying the Meter To display the meter, access the HOME screen and press the left-most function button (METER). You can change the meter type by using the left-most function button (PREV) and the right-most function button (NEXT). Level meter TX6n/5n/4n Owner's Manual 9