Yamaha Tyros4 Owner's Manual - Page 96
Connecting Audio Devices, Connecting the Optional Yamaha TRS-MS04 Speaker
UPC - 086792947280
View all Yamaha Tyros4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Connecting Audio Devices IMPORTANT Since the Tyros4 has no built-in speakers, you need to monitor its sound output via external audio equipment. Alternatively, you could use a pair of headphones (page 15). Connecting the Optional Yamaha TRS-MS04 Speaker Use the [TO RIGHT SPEAKER], [TO LEFT SPEAKER] and [TO SUB WOOFER L/R] jacks. See page 106. Using External Audio Devices for Playback The [LINE OUT] jacks are used to send the Tyros4 output to a keyboard amplifier, stereo sound system or mixing console. If you are connecting the Tyros4 to a mono sound system, use only the [L/L+R] jack. When only this jack is connected (using a standard phone plug), the left and right channels are combined and output through this jack-allowing you have a mono mix of the Tyros4's stereo sound. NOTE You can send a specific part to desired LINE OUT jack(s). The operation display can be called up: [MIXING CONSOLE] TAB [][] LINE OUT. For details, refer to the Reference Manual on the website. Powered speakers NOTE You can also use the [AUX OUT/LOOP SEND] jacks instead [LINE OUT] jacks. However, the output volume from [AUX OUT/LOOP SEND] cannot be controlled by MASTER VOLUME. Phone plug (standard) Input jack Phone plug (standard) CAUTION When the Tyros4's sound is output to an external device, first turn on the power to the Tyros4, then to the external device. Reverse this order when you turn the power off. Audio cable 96 Tyros4 Owner's Manual