Yamaha V2.0 V2.0 Supplement - Page 2

Upgrading the RCD24

Get Yamaha V2.0 PDF manuals and user guides View all Yamaha V2.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

2 Upgrading the RC-D24 The following procedure explains how to upgrade the D24's remote controller, the RC-D24. Be sure to use the MO disk labelled "Ver. 2.00 DISK." 1 Turn off the D24. 2 Connect the RC-D24 to the D24. 3 Turn on the D24. 4 Turn on the RC-D24. 5 Confirm that "00:00:00.00" is shown on the RC-D24 display. 6 Insert the MO disk labelled "Ver. 2.00 DISK" into the D24. 7 When the message "UNFORMATTED" appears on the 2nd line of the display (which takes about 10 seconds), press the [UTILITY] button. 8 Use the JOG/DATA dial to select "UPDATE," and then press the [ENTER] button. 9 When the message "UPDATE - D24" appears, use the JOG/DATA dial to select "RCU," and then press the [ENTER] button. The message "WAITING" appears. The RC-D24 and D24 counters count up from 1/374" to "374/374," which takes about 120 seconds. After a further 20 seconds the RC-D24 transport buttons start flashing. The upgrade procedure is now complete. Warning: Do not turn off the D24 or RC-D24 before the transport buttons start flashing. 10 To check the version number, first turn off and on the D24, and then, while pressing the RC-D24's [RTN TO ZERO] button, turn on the RC-D24. The RC-D24 version number appears on the display as follows: "200 xxxxxx". D24-Version 2.0 Supplement

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
2
D24—Version 2.0 Supplement
Upgrading the RC-D24
The following procedure explains how to upgrade the D24’s remote controller, the
RC-D24. Be sure to use the MO disk labelled “Ver. 2.00 DISK.”
1
Turn off the D24.
2
Connect the RC-D24 to the D24.
3
Turn on the D24.
4
Turn on the RC-D24.
5
Confirm that “00:00:00.00” is shown on the RC-D24 display.
6
Insert the MO disk labelled “Ver. 2.00 DISK” into the D24.
7
When the message “UNFORMATTED” appears on the 2nd line of the display
(which takes about 10 seconds), press the [UTILITY] button.
8
Use the JOG/DATA dial to select “UPDATE,” and then press the [ENTER] but-
ton.
9
When the message “UPDATE – D24” appears, use the JOG/DATA dial to select
“RCU,” and then press the [ENTER] button.
The message “WAITING” appears. The RC-D24 and D24 counters count up from
1/374” to “374/374,” which takes about 120 seconds. After a further 20 seconds the
RC-D24 transport buttons start flashing. The upgrade procedure is now complete.
10
To check the version number, first turn off and on the D24, and then, while
pressing the RC-D24’s [RTN TO ZERO] button, turn on the RC-D24.
The RC-D24 version number appears on the display as follows: “200 xxxxxx”.
Warning:
Do not turn off the D24 or RC-D24 before the transport buttons start flashing.