Yamaha V2.5 RIVAGE PM series V2.5 Supplemental Manual EN - Page 10
Improved screen encoder operation, Improved channel name display, Improved HY SLOT4 feature
View all Yamaha V2.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Improved screen encoder operation Improved screen encoder operation You can now use the screen encoders to edit EQ and dynamics parameters on the SELECTED CHANNEL VIEW screen. EQ Dynamics CONTENTS Improved HY SLOT4 feature The encoder numbers displayed on the screen correspond to the actual screen encoder numbers. Improved channel name display In SENDS ON FADER mode, the channel on/off status is now indicated in the channel name display area on the panel. Channel on Channel off ch 1 CH 1 -∞ ch 1 CH 1 -∞ During channel mute, the channel name will be highlighted in the same way as when the channel is off, but it will also be flashing. HY SLOT4 (HY SLOT3 on the CSD-R7) now supports input/output patches. Due to this improvement, output channels are now patched via the OUTPUT tab, not on the RECORDING tab. Addition input patch setting When you modify input patches, you can now select TAKE FROM PORT or TAKE FROM CHANNEL. If you select TAKE FROM PORT, the HA parameter settings retained by the patched port will be used as is. If you select TAKE FROM CHANNEL, the HA parameter settings retained by the input channel will be copied to the destination port. INPUT patch screen 10 RIVAGE PM series V2.5 Supplemental Manual