Yamaha V3.5 DME Designer V3.5 Owners Manual - Page 21
Before Using, Installing DME Designer
View all Yamaha V3.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Before Using Installing DME Designer To use DME Designer, you must first install the software on the computer. Before you can connect the DME Designer software to the DME or SP2060 unit, you must first install the USB MIDI Driver or the DME-N Network Driver, according to how you will be connecting, and then make the appropriate settings. For instructions about the installation and setup for the DME Designer and DME-N Network Driver, and about the installation for the USB-MIDI Driver, see the "DME Setup Manual." NOTE Initial settings for DME Satellite units must be transferred via USB-MIDI, so it is necessary to properly install the USB-MIDI Driver. Starting DME Designer The DME Designer software is started from the [Start] menu. DME Designer is used with one user logged on. The user logs on when the software is started. ■ DME Designer Start Up and Logon (When Auto-Logon Is Not Set) 1 Click [Start] ➞ [All Programs] ➞ [YAMAHA OPT Tools] ➞ [DME Designer] ➞ [DME Designer]. NOTE In Windows2000, click [Start] → [Programs] → [YAMAHA OPT Tools] → [DME Designer] → [DME Designer]. The "Log On" dialog box will be displayed. NOTE Automatic log-on is the default setting. If the automatic logon feature is enabled, the "Log On" dialog box will not be displayed when the application is started. Instead, the auto-logon user will be logged on automatically. See page 29 for information about auto-logon. DME Designer Owner's Manual 21