Yamaha YAS-152 Owners Manual - Page 7

Connections Connect to a TV (or other peripheral device). CAUTIONS • Do not connect the power cable of the sound bar to the AC wall outlet before making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or AC wall outlet. 1 Connect the TV and sound bar with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. 2 Connect the power cable of the sound bar to an AC wall outlet. 3 Set the TV as follows. • Set the TV volume to minimum. • Disable the TV built-in speaker output (if available). HINT • If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV. • The TV and BD/DVD input jacks support the following audio signals. − PCM (2ch) − Dolby Digital (up to 5.1 channels) − DTS Digital Surround (up to 5.1 channels) • See the following pages for details on other connections. For analog and portable devices (p.10). For an external subwoofer (p.13). Sound bar (rear) Optical cable TV Coaxial digital cable OPTICAL OUTPUT Power cable To AC wall outlet HINT • The unit plays the audio output from your TV. If the sound output from a playback device (such as a BD player) or a set top box cannot be output from your TV or if your TV does not have any audio input jacks to connect a playback device, connect the playback device and sound bar directly with a commercially available digital coaxial cable. Playback device (such as a BD player) Set top box DIGITAL OUTPUT En 5