Yamaha YDP-103 YDP-103 Owners Manual - Page 24

Keyboard Stand Assembly 6-1 6-2 6-3 D B Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. After completing the assembly, please check the following. • Are there any parts left over?  Review the assembly procedure and correct any errors. • Is this instrument clear of doors and other movable fixtures?  Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it?  Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals?  Turn the adjuster so that it is set firmly against the floor. • Are the pedal cord plug and the adaptor plug inserted securely into the sockets?  Check the connection. When moving the instrument CAUTION When moving the instrument after assembly, always hold the bottom of the main unit. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. NOTICE Rotate the adjuster under the pedal until it separates from the floor surface. Contact with the adjuster can result in damage to the floor surface. Do not hold here. Top portion Key cover 7. Set the adjuster. Rotate the adjuster until it comes in firm contact with the floor surface. 24 YDP-103 Owner's Manual Hold here. Separate the adjuster from the floor surface. Transporting If you move to another location, you can transport the instrument along with other belongings. You can move the unit as it is (assembled), or you can disassemble the unit down to the condition it was in when you first took it out of the box. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. When transporting the assembled instrument, make sure all screws are properly tightened and have not been loosened by moving the instrument. CAUTION If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws.