Yamaha YDS-120 YDS-120 Owners Manual - Page 11

Changing Settings with the [Fn] Button Press specific keys while holding the [Fn] button to perform settings for the various functions of the instrument. Basic operations Use the following procedure to perform settings for each function. 1 While holding the [Fn] button, press the key to which the function is assigned. Hold the [Fn] button until you finish performing settings. If you release the button, the value at that moment is set and operation returns to the Voice selection screen. Example: Tuning C5 key 2 While holding the [Fn] button, press VOICE [ ]/ [ ] and select the desired value. Function Settings Key Breath pressure resistance 1 to 5 C3 Determines how much the sound volume changes in response to the sustained strength of your breath. The lower the value, the more responsive the instrument is to your breath strength. Default: 3 Breath response 1 to 10 Tc Determines how much the sound volume changes in response to your initial breath strength. The higher the value, the harder you have to initially blow into the instrument to produce sound. Default: 5 Key response 0 to 20 Ta Prevents unwanted sounds from being produced, due to inconsistent timing in fingering when pressing or releasing multiple keys simultaneously. The higher the value, the more unwanted sounds are suppressed. Default: 10 Tuning 427 to 453 (Hz) C5 Adjusts the overall pitch of the instrument. The pitch value is displayed on the LED screen. You can adjust the pitch in the range of 427 to 453 Hz in 0.5 Hz steps. The dot in the first digit of the LED display indicates 0.5 Hz. Default: 440 Auto power off Off, 5, 10, 15, Tf Sets the function for automatically 30, 60, 120 turning the power off. The value is dis- (minutes) played on the LED screen. Default: 30 Reverb Off, 1 to 5 G# Set the reverberation effect. The higher the number, the greater the effect. Reverberation is applied only to the headphone output. Default: Off NOTE • Reverberation does not affect the AUX IN input. NOTE • Press both VOICE [ ]/[ ] buttons simultaneously to restore the value to the factory default. 3 When you have finished selecting a value, release the [Fn] button. This will complete the setting and return the operation to the Voice selection screen. YDS-120 Owner's Manual 13