Yamaha YPT-230 Owner's Manual - Page 29

Function Settings Function Setting List No. Item Volume 001 Style Volume 002 Song Volume Overall Display Range/ settings StyleVol 000-127 SongVol 000-127 003 Transpose Transpos -12-00-12 004 Tuning 005 Split Point Main Voice Tuning 427.0-453.0 (Hz) SplitPnt 000-127 (C-2-G8) 006 Main Voice Volume M.Volume 000-127 007 Main Voice Octave 008 Main Voice Chorus Send Level Effect M.Octave -2-0-2 M.Chorus 000-127 009 Reverb Type Reverb 01-10 010 Reverb Level RevLevel 000-127 011 Chorus Type Chorus 1-5 012 Panel Sustain Sustain ON/OFF 013 Master EQ Type MasterEQ 1 Speaker 2 Flat 014 Wide Type MIDI Wide 1-3 015 Local On/Off Local ON/OFF 016 External Clock ExtClock ON/OFF 017 Initial Setup Send Metronome InitSend YES/NO 018 Time Signature TimeSig 00-15 019 Metronome Volume MetroVol 000-127 Default setting Description 100 Determines the volume of the Style. 100 Determines the volume of the Song. 00 440.0 (Hz) 54 (F#2) Determines the pitch of the instrument in semitone increments. NOTE: The pitch of the Drum Kits Voices cannot be changed. Determines the fine tuning of the pitch of the entire instrument in approx. 0.2Hz increments. NOTE: The pitch of the Drum Kits Voices cannot be changed. Sets the Split "point"-in other words, the key that separates the auto accompaniment range and Main voice. Determines the volume of the Main Voice to adjust the balance * between Song playback and the notes you play on the key- board. * Determines the octave range for the Main Voice. * Determines how much of the Main Voice's signal is sent to the Chorus effect. ** 64 ** OFF 1 Speaker 2 Determines the Reverb type, including off (10). Refer to the Reverb Type list on page 41. Determines how much of the Voice's signal is sent to the Reverb effect. Determines the Chorus type, including off (05). Refer to the Chorus Type list on page 41. Determines whether or not Panel Sustain is always applied to the Main Voices. Panel Sustain is applied continuously when ON, or not applied when OFF. Sets the equalizer applied to the speaker output for optimum sound in different listening situations. Speaker: For listening via the instrument's built-in speakers. Flat: For headphones, or for listening via external speakers. Determines the Ultra-Wide Stereo type. Higher values produce a greater Wide effect. ON OFF - Determines whether the instrument's keyboard controls the internal tone generator (ON) or not (OFF). On Both the notes played on the instrument's keyboard and data received via the instrument's MIDI terminal will be played by the internal tone generator. Off With this setting, the instrument itself produces no sound, but the performance data is transmitted via the MIDI terminal. Data received via the instrument's MIDI terminal will also be played by the internal tone generator. Determines whether the instrument synchronizes to the internal clock (OFF) or an external clock (ON). Lets you send the data of the panel settings to a computer. Use the [+] button to transmit the data. Determines the time signature of the Metronome. ** A chime will sound on the first beat of each measure while the other beats will click. All beats will simply click with no chime at the beginning of each measure if you set this parameter to "00". 100 Determines the volume of the Metronome. PSR-E233/YPT-230 Owner's Manual 29