Yamaha YPT-330 Owner's Manual - Page 41

Function Settings The [FUNCTION] button gives you access to a variety of operations related to adjusting or enhancing the sound and making settings for connection to external devices. For more about the available functions, see the following Function Setting List. Select the item and change the value 1 Press the [FUNCTION] button a number of times until the desired item appears. Each time the [FUNCTION] button is pressed, the Function number increases one by one. You can also decrease the Function number by one when you press the [-] button briefly while holding down the [FUNCTION] button. Value Function item NOTE • The Function number will not appear in the display during Song, Style or metronome playback. The measure will appear instead. 100 StyleVol 001 Function number If the Function includes sub-modes, the Function item appears in the display for a few seconds, and the sub-modes will be displayed. 2 Set the value by using the number buttons [0]-[9], [+], [-]. Direct numeric entry. • Decrement value by 1. • No • Off Press simultaneously to recall the default setting. • Increment value by 1. • Yes • On NOTE • Some Function settings are stored in memory as soon as they are changed. See "The Backup Parameters" on page 40 for information on the Function settings that are stored on the instrument. • To exit the Function settings, press one of these buttons; [SONG], [VOICE],[STYLE] or [GRAND PIANO]. Function Setting List No. Item Volume 001 Style Volume 002 Song Volume Overall Display Range/ settings StyleVol 000-127 SongVol 000-127 003 Transpose Transpos -12-00-12 004 Tuning Tuning 427.0-453.0 (Hz) 005 Split Point 006 Touch Sensitivity SplitPnt 000-127 (C-2-G8) 1 Soft TouchSns 2 Medium 3 Hard Default setting Description 100 Determines the volume of the Style. 100 Determines the volume of the Song. 00 440.0 (Hz) 54 (F#2) 2 Medium Determines the pitch of the instrument in semitone increments. NOTE: The pitch of the Drum Kits Voices cannot be changed. Determines the fine tuning of the pitch of the entire instrument in approx. 0.2Hz increments. NOTE: The pitch of the Drum Kits Voices cannot be changed. Determines the highest key for the Split Voice and sets the Split "point"-in other words, the key that separates the Split (lower) and Main (upper) Voices. The Split Point setting and Accompaniment Split Point setting are automatically set to the same value. When Touch Response is on, this determines the sensitivity of the feature. Higher values produce greater (easier) volume variation in response to keyboard dynamics. PSR-E333/YPT-330 Owner's Manual 41