Yamaha YSP-5100 Owner's Manual - Page 37

INTRODUCTION PREPARATION PLAYBACK FEATURES ■ OSD SETUP (OSD setup) SET MENU → DISPLAY MENU → OSD SETUP Use to adjust the display position and select the background color of the OSD. OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the - (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices: -5 to +5 Initial setting: ±0 OSD BACK COLOR (OSD background color) Use to select the background color of the OSD. Choices: Blue*, Gray, Black, Purple, Red ■ LANGUAGE SETUP (Language setup) SET MENU → DISPLAY MENU → LANGUAGE SETUP Use to select the language used in the OSD. Choices: ENGLISH (English), DEUTSCH (German), Français (French), ESPAÑOL (Spanish), ITALIANO (Italian), NEDERLANDS (Dutch Russian) Initial setting: ENGLISH (English) ■ UNIT SETUP (Unit setup) SET MENU → DISPLAY MENU → UNIT SETUP Use this to change the display unit of measurement. Choices: METERS*, FEET • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note • If you change this setting, the adjusted sound beam settings may change. System configurations (ADVANCED SETUP) This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. 1 Press CPower p key to set this unit to the standby mode. 2 While holding down INPUT on the front panel, press CPower p key on the remote control. Keep holding down INPUT until "ADVANCED SETUP" appears on the front panel display. INPUT INPUT VOLUME INTELLIBEAM MIC 3 Press ISETUP. 4 Press G / to select the desired menu and then press GENTER. Example (when "DEMO MODE" is selected) VOL DEMOXMODE y • To return to the previous screen, press IRETURN. 5 Press G / to select the desired parameter. 6 Press CPower p key to set this unit to the standby mode. The new setting will be reflected when you turn on this unit next time. y • The initial settings are marked with "*". TURN ON VOLUME (Volume level at power-on) Set the initial volume level when the power of this unit is turned on. Control range: OFF*, 01 to 99, MAX (Maximum) MAX VOLUME SET (Maximum volume setting) Set the maximum volume level so that this unit will not output sound beyond the limited volume level. Control range: 01 to 99, MAX* (Maximum) PANEL INP.KEY (Front panel input key) Select whether or not to enable the INPUT key on front panel key. To disable the operations, select "P.INPUT: OFF". Choices: P.INPUT: ON*, P.INPUT: OFF F.PANEL KEY (Front panel key) Select whether or not to enable front panel key operations (except ADVANCED SETUP operations). To disable the operations, select "F.PANEL: OFF". Choices: F.PANEL: ON*, F.PANEL: OFF Customizing this unit (SET MENU) System configurations (ADVANCED SETUP) Using an external amplifier Controlling external components SETTINGS APPENDIX 37 En