Yamaha YSP-5100 Owner's Manual - Page 42

Problem Cannot operate external components with the remote control of this unit. Cause Remedy The external component you want to operate is not selected as the input source. Press the desired DInput selector key to select the external component you want to operate. The remote control code was not correctly set. Set the remote control code correctly or try another code for the same manufacturer using the "List of remote control codes". Even if the remote control code is correctly set, there are some models that do not respond to the remote control. Use the remote control supplied with the external component. See page 39 39 - ■ iPod Problem Cause Remedy No sound. PDX-50TX is connected to another device. Select the same group ID as selected on this unit. PDX-50TX and this unit are not connected since they Set both PDX-50TX and this unit to the same group. are set to different groups. "Wireless Function" is set to "No". Set "Wireless Function" to "Yes". Distance is too far. Move PDX-50TX closer to this unit. There is a device (microwave oven, wireless LAN, etc.) outputting signals in 2.4 GHz frequency band nearby. Move this unit away from the device. If the device is IEEE802.11n-compliant, change the channel setting of the device so as not to affect the unit. The iPod or iPhone is not connected to PDX-50TX Connect the iPod or iPhone firmly. firmly. The firmware of the iPod or iPhone is not updated. Download the latest iTunes software to update the firmware of the iPod or iPhone. The signal from PDX-50TX is blocked by your body Change the way of holding, orientation, or position of or metallic objects, etc. PDX-50TX to avoid the object blocking the signal. The battery of iPod or iPhone is low. Charge the iPod or iPhone. The iPod or iPhone is in the process of connecting with this unit. Please wait for a while. The protection circuitry has been activated by excessive volume. Turn down the volume. Controlling volume on the iPod or The iPod or iPhone being used is not supported by iPhone does not work. this unit. Use an iPod or iPhone supported by this unit. The iPod or iPhone is not connected to PDX-50TX Connect the iPod or iPhone firmly. firmly. Suddenly this unit produces sounds even though an iPod or iPhone is not connected. This unit is connected to another device. Change the group ID of this unit. The iPod/iPhone interlock function "iPod Interlock" is set to "OFF". does not work. Set "iPod Interlock" to "ON". See page - 36 36 - - - - - - - 21 27 - 36 36 42 En