Yamaha YSTSW216BL Owners Manual - Page 12

CONTROLS AND THEIR FUNCTIONS Subwoofer rear panel 1 OUTPUT TO SPEAKERS INPUT 1 FROM AMPLIFIER INPUT 2 HIGH CUT /MONO VOLUME HIGH LOW POWER ON OFF 2 OUTPUT TO SPEAKERS INPUT 1 FROM AMPLIFIER 7 INPUT 2 HIGH CUT 34 /MONO HIGH LOW VOLUME 65 1 POWER switch Press this switch to the ON position to turn on the power to the subwoofer. When the power of the subwoofer is on, the power indicator (4) on the rear panel light up in green. Press this switch again to set it to OFF position to turn off the power of the subwoofer. 2 OUTPUT (TO SPEAKERS) terminals Can be used for connecting to the front speakers. Signals from the INPUT 1 terminals are sent to these terminals. (Refer to "CONNECTIONS" for details.) 3 VOLUME control Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume. 4 Power indicator Light up in green when the power switch (1) is turned on; turns off when the power switch is turned off. 5 HIGH CUT switch Selects the high frequency cut off point. Normally, it is set to LOW, however, you may set to HIGH if necessary. (Refer to page 9) 6 INPUT 2 terminals Used to input line level signals from the amplifier. (Refer to "CONNECTIONS" for details.) 7 INPUT 1 (FROM AMPLIFIER) terminals Used to connect the subwoofer with the speaker terminals of the amplifier. (Refer to "CONNECTIONS" for details.) 8