Yamaha YSTSW216BL Owners Manual - Page 5

SPECIAL INSTRUCTIONS FOR U.K. MODEL IMPORTANT: THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. VOLTAGE SELECTOR (For Asia and General models only) The voltage selector switch on the rear panel of this unit must be set for your local main voltage BEFORE plugging this unit into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz. CONTENTS FEATURES CAUTION iii FEATURES 1 SUPPLIED ACCESSORIES 1 PLACEMENT 2 CONNECTIONS 3 1 Connecting to line output (pin jack) terminals of the amplifier 3 2 Connecting to speaker output terminals of the amplifier 5 Connecting to the INPUT 1/ OUTPUT terminals of the subwoofer 7 Plug in the subwoofer to the AC outlet 7 • This subwoofer system employs Advanced Yamaha Active Servo Technology II which Yamaha has developed for reproducing higher quality super-bass sound. (Refer to page 11 for details on Advanced Yamaha Active Servo Technology II.) This super-bass sound adds a more realistic, theater-in-the-home effect to your stereo system. • This subwoofer can be easily added to your existing audio system by connecting to either the speaker terminals or the line output (pin jack) terminals of the amplifier. • The HIGH CUT switch provides you with two positions (HIGH and LOW) to adjust the tone balance between the subwoofer and the front speakers. CONTROLS AND THEIR FUNCTIONS 8 ADJUSTING THE SUBWOOFER BEFORE USE 9 Frequency characteristics 10 ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY II 11 SUPPLIED ACCESSORIES After unpacking, check that the following parts are contained. TROUBLESHOOTING 12 SPECIFICATIONS 13 Non-skid pads (1 set, 4 pieces) 1