Zanussi LINDO300 ZWF81463WR User Manual - Page 12

Hints and tips

Get Zanussi LINDO300 ZWF81463WR PDF manuals and user guides View all Zanussi LINDO300 ZWF81463WR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the operates) : 1. Touch the button appliance. to pause the 2. Wait until the indicator goes off. 3. You can open the door. 4. Close the door and touch the button again. The programme (or the ) continues. At the end of the programme • The appliance stops automatically. • The acoustic signal operates (if it is activated). • In the display comes on. • The indicator of the button goes off. • The door lock indicator goes off. • You can open the door. • Remove the laundry from the appliance. Make sure that the drum is empty. • Press the button for some seconds to deactivate the appliance. • Close the water tap. • Keep the door and the detergent drawer ajar, to prevent the mildew and odours. The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator flashes to remind you to drain the water. • The door lock indicator is on. The indicator of button stays locked. flashes. The door Hints and tips The laundry load • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and coloured items. 12 • You must drain the water to open the door. Draining the water: 1. To drain the water. • Touch the button . The appliance drains the water and spins with the maximum spin speed for selected washing programme. • Alternatively, touch the button to change the spin speed and then touch the button . The appliance drains the water and spins. If you set , the appliance only drains. 2. When the programme is completed and the door lock indicator open the door. goes off, you can 3. Press the button for some seconds to deactivate the appliance. The appliance drains and spins automatically after approximately 18 hours (except for Wool programme). AUTO-OFF option The AUTO-OFF stand-by option automatically deactivates the appliance to decrease the energy consumption. All the indicators and the display go off when : • You do not use the appliance for 5 minutes before you touch . Press the button to activate the appliance again. • After 5 minutes from the end of the washing programme. Press the button to activate the appliance again. The display shows the end of the last set programme. Touch the button if you want to set a new cycle. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts. • Empty the pockets and unfold the items. • Turn inside out multilayered fabrics, wool and items with painted illustrations. www.zanussi.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
CAUTION!
If the temperature and level of the
water in the drum are too high, you
cannot open the door.
To open the door during the first minutes
of the cycle (or when the
operates) :
1.
Touch the button
to pause the
appliance.
2.
Wait until the indicator
goes off.
3.
You can open the door.
4.
Close the door and touch the button
again. The programme (or the
)
continues.
At the end of the programme
•
The appliance stops automatically.
•
The acoustic signal operates (if it is
activated).
•
In the display
comes on.
•
The indicator of the button
goes off.
•
The door lock indicator
goes off.
•
You can open the door.
•
Remove the laundry from the appliance.
Make sure that the drum is empty.
•
Press the button
for some seconds to
deactivate the appliance.
•
Close the water tap.
•
Keep the door and the detergent drawer
ajar, to prevent the mildew and odours.
The washing programme is completed,
but there is water in the drum:
•
The drum turns regularly to prevent the
creases in the laundry.
•
The indicator
flashes to remind you to
drain the water.
•
The door lock indicator
is on. The
indicator of button
flashes. The door
stays locked.
•
You must drain the water to open the door.
Draining the water:
1.
To drain the water.
•
Touch the button
. The appliance
drains the water and spins with the
maximum spin speed for selected
washing programme.
•
Alternatively, touch the button
to
change the spin speed and then touch
the button
. The appliance drains the
water and spins. If you set
, the
appliance only drains.
2.
When the programme is completed and the
door lock indicator
goes off, you can
open the door.
3.
Press the button
for some seconds to
deactivate the appliance.
The appliance drains and spins
automatically after approximately 18
hours (except for Wool programme).
AUTO-OFF option
The AUTO-OFF stand-by option automatically
deactivates the appliance to decrease the
energy consumption. All the indicators and the
display go off when :
•
You do not use the appliance for 5 minutes
before you touch
.
Press the button
to activate the appliance
again.
•
After 5 minutes from the end of the washing
programme.
Press the button
to activate the appliance
again.
The display shows the end of the last set
programme.
Touch the button
if you want to set a new
cycle.
Hints and tips
The laundry load
•
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
•
Obey the washing instructions that are on
the laundry care labels.
•
Do not wash together white and coloured
items.
•
Some coloured items can discolour with the
first wash. We recommend that you wash
them separately for the first times.
•
Button up pillowcases, close zippers, hooks
and poppers. Tie up belts.
•
Empty the pockets and unfold the items.
•
Turn inside out multilayered fabrics, wool
and items with painted illustrations.
12
www.zanussi.com