Zanussi LINDO300 ZWF81463WR User Manual - Page 14
Maintenance wash, Door seal, Cleaning the detergent dispenser, Cleaning the inlet hose and the valve
View all Zanussi LINDO300 ZWF81463WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this: • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent. Door seal Regularly examine the seal and remove all objects from the inner part. Cleaning the inlet hose and the valve filter 1 2 1 2 3 3 4 Cleaning the detergent dispenser 1 2 3 4 45° 20° Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 1. Disconnect the mains plug from the mains socket. 2. Remove the water inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot. 4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses. 5 6 5. When no more water flows, install the inlet hose and the drain hose again. 14 www.zanussi.com