Zanussi Z712W43BI User Manual - Page 17
Child Lock
View all Zanussi Z712W43BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
To activate/deactivate this option , hold down the Prewash button until relevant indicator comes on/goes off. • SPIN When you set a programme, the appliance automatically sets the maximum spin speed allowed except programme Denim. Push this button to set additional spin options: • Decrease the spin speed. The display shows only the spin speeds available for the set programme. • No spin comes on display. Set this option to deactivate all spin phases. The appliance performs only the draining phase of the selected washing programme. Set this option for very delicate fabrics. The rinse phase uses more water for some washing programmes • Rinse hold . The related indicator comes on. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum. The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door. If you touch the Start/Pause button, the appliance performs the spinning phase and drains the water. • Quiet . The related indicator comes on. The intermediate and the final spinning phases are suppressed and the programme ends with water in the drum. This helps to reduce creasing. The door stays locked. The drum turns regularly to reduce creasing. You must drain the water to unlock the door. As the programme is very quiet, it is suitable for use at night time when cheaper electricity tariffs are available. In some programmes the rinses are performed with more water. If you touch the Start/Pause button, the appliance performs only the draining phase. The appliance empties the water out automatically after approximately 18 hours. CHILD LOCK With this option you can prevent children from playing with the control panel. • To activate/deactivate this option, hold down the Spin button until comes on/goes off on the display. The appliance will default to this option after you switch it off. The Child Lock function may not be available for a few seconds after switching the appliance on. TEMP. When you select a washing programme, the appliance automatically proposes a default temperature. Touch this button repeatedly until the desired temperature value appears on the display. When the display shows the indicators , the appliance does not heat the water. ON/OFF Press this button for a few seconds to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off. As the Stand-by function automatically deactivates the appliance after several minutes to reduce the energy consumption, you may need to activate the appliance again. For more details, refer to Stand-by paragraph in Daily Use chapter. 17