Zanussi ZBB28441SA Product Manaul - Page 14

8 mm 8 mm K Ha Hb Ha 11 Open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes. 12 Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K). Do a final check to make sure that: • All screws are tightened. • The magnetic sealing strip is attached tightly to the cabinet. Important! If the ambient temperature is low (for example, in the Winter), the size of the gasket decreases. The size of the gasket increases when the ambient temperature increases. Hb Hb Hd 13 Place the small 14 Press the part square on the guide (Hd) on the part (Hb). again and fix it with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part (Hb). Environmental concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent 14 potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. www.zanussi.com