Zanussi ZCG43250XA User Manual - Page 11
Oven function, Application, MAIN OVEN FUNCTIONS, IGNITING THE OVEN BURNERS, CAUTION, Oven safety
View all Zanussi ZCG43250XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Oven function Application 1 - 8 1) Heat settings Ignition Heat settings for Conventional Cooking. To activate the top oven. 1) 1 - 155 °C, 2 - 170°C, 3 - 185°C, 4 -200°C, 5 - 220°C, 6 - 250°C, 7 - 275°C, 8 - 295°C MAIN OVEN FUNCTIONS Oven function Application Off position The oven is off. Minimum temperature To set the minimum temperature. 1 - 81) Heat settings Ignition Heat settings for Conventional Cooking. To activate the main oven. 1) min - 130 °C, 1 - 155°C, 2 - 170°C, 3 -185°C, 4 - 205°C, 5 - 225°C, 6 - 240°C, 7 - 255°C, 8 260°C IGNITING THE OVEN BURNERS CAUTION! When the oven is active, the lid has to be opened to avoid overheating. Keep the oven door open when you ignite the burner. WARNING! Do not push the knob for more than 15 seconds. If the oven burner does not light after 15 seconds, release the knob, turn it back to off position and try to light the oven burner again after minimum 1 minute. Oven safety device: The oven burners have a thermocouple. It stops the gas flow, if the flame goes out. You cannot operate the top oven burner, when the grill is active. 1. Open the oven door. 2. Push the knob for the main oven and turn it counterclockwise to to ignite the main oven burner. • Push the knob for the top oven and turn it counterclockwise to to ignite the top oven burner. 3. Keep the knob pushed for equal or less than 15 seconds to let the thermocouple warm up. If not, the gas flow is interrupted. 4. After ignition release the knob, close the oven door and turn the knob to set the necessary heat setting. CAUTION! In the absence of electricity you can ignite the oven burner without an electrical device. In this case open the oven door, put the flame near the hole in the bottom of the oven cavity, turn the knob to the spark position and push it down. Keep the knob for the oven functions pushed for equal or less than 15 seconds to let the thermocouple warm up. If the oven burner accidentally goes out, turn the knob for the oven functions to the off position and try to light the burner again after minimum 1 minute. Check if the burner holes are not blocked. 11