Zanussi ZDC37200W Product Manaul - Page 12
Technical data, Machine settings - fault
View all Zanussi ZDC37200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Drying cycle to Small laundry volume./Too dry laundry for short selected programme. Select time programme or higher drying level (e.g. EXTRA DRY ). Fluff filters clogged. Clean fluff filters. Drying cycle to long 4) To high loading volume. Laundry insufficiently spun. Particularly high room temperature - no machine fault. Respect max. loading volume. Spun adequately the laundry. Lower the room temperature if possible. 1) Switch the dryer off. Set programme/time. Press the START PAUSE button. 2) follow program recommendation - see Programme overview chapter 3) see Care and cleaningchapter 4) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section). Technical data Dimensions (mm) Width / Height / Depth 85 x 60 x 58 cm Max. depth (with the appliance door open) 1090 mm Max. width (with the appliance door open) 950 mm Electrical connection Voltage 230-240 V Frequency 50 Hz Fuse 13 A Total power 2350 W Drum volume 108 l Weight of the appliance 36 kg Laundry: max. weight 7 kg Type of use Household Ambient temperature Min. 5 °C Max. 35 °C Energy consumption 1) kWh/cycle 4,70 kWh Annual energy consumption 2) 552 kWh Energy efficiency class C Power consumption Left-on mode 0 W Off-mode 0 W 1) With reference to EN 61121. 7 kg of cotton and a spin speed at 1000 rpm. 2) Energy consumption per year in kWh, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used (REGULATION (EU) No 392/2012). Machine settings BUZZER permanent off 12 www.zanussi.com