Zanussi ZDC8203WZ User Manual - Page 13
Troubleshooting
View all Zanussi ZDC8203WZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CAUTION! Do not use abrasive materials or steel wool to clean the drum. CLEANING THE CONTROL PANEL AND HOUSING Use a standard neutral soap detergent to clean the control panel and housing. Use a moist cloth to clean. Dry the cleaned surfaces with a soft cloth. TROUBLESHOOTING CAUTION! Do not use furniture cleaning agents or cleaning agents which can cause corrosion. CLEANING THE AIRFLOW SLOTS Use a vacuum cleaner to remove fluff from the airflow slots. Problem You cannot activate the appliance. The programme does not start. The appliance door does not close. The appliance stops during operation. The cycle time is too long or unsatisfactory drying result.1) The display shows Err. Possible solution Make sure that the mains plug is connected to the mains socket. Check fuse in fuse box (domestic installation). Press Start/Pause. Make sure that the appliance door is closed. Make sure that the installation of the filter is correct. Make sure that the laundry does not catch between the appliance door and the rubber seal. Make sure that the water container is empty. Press Start/Pause to start the programme again. Make sure that the weight of the laundry is applicable to the duration of the programme. Make sure that the filter is clean. The laundry is too wet. Spin the laundry in the washing machine again. Ensure that the room temperature is higher than +5°C and lower than +35°C. Optimal room temperature is 19°C to 24°C. Set the Time Drying or the Extra Dry programme.2) If you want to set a new programme, deactivate and activate the appliance. Make sure that the options are applicable to the programme. 13