Zanussi ZDC8203WZ User Manual - Page 14

Problem Possible solution The display shows (e.g. E51). Deactivate and activate the appliance. Start a new programme. If the problem occurs again, contact the Service. 1) After maximum 5 hours, the programme ends automatically. 2) It can happen that some area remains humid when drying big items (e.g. bed sheets ). If the drying results are not satisfactory • The set programme was incorrect. • The filter is clogged. • The condenser is clogged. • There was too much laundry in the appliance. • The drum is dirty. • Incorrect setting of the conductivity sensor ( See chapter "Settings - Adjustment of the TECHNICAL DATA remaining laundry moisture degree " for better setting). • The airflow slots are clogged. • Room temperature is too low or too high ( optimal room temperature 19°C to 24°C ) Height x Width x Depth Max. depth with the appliance door open Max. width with the appliance door open Adjustable height Drum volume Maximum load volume Voltage Frequency Sound power level Necessary fuse Total power Energy efficiency class Energy consumption on the standard cotton programme with the full load. 1) Energy consumption on the standard cotton programme with the partial load. 2) Annual energy consumption3) Left-on mode power absorption 4) Off mode power absorption 4) Type of use 850 x 600 x 600 mm (maximal 665 mm) 1090 mm 950 mm 850 mm (+ 15 mm - feet regulation) 118 l 8 kg 230-240 V 50 Hz 66 dB 13 A 2800 W B 4,81 kWh 2,52 kWh 560,5 kWh 0,05 W 0,05 W Household 14