Zanussi ZFP316S User Manual - Page 20
Care And Cleaning
View all Zanussi ZFP316S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners. It is recommended to leave the hood operating for approximately 15 minutes after cooking. To operate the hood: 1. Pull out the drawer of the hood more than 5 cm. 3. If needed, change the speed by pressing the desired button. The hoods light works independently to other hood functions. To illuminate the cooking surface press the light button . Closing the drawer has no effect on the hood light. The control panel is exposed. 2. To activate the function press the CARE AND CLEANING button. To turn off the fan press drawer. or close the hood The hood remembers last setting of fan speed on closing the drawer. The hood will operate on this fan speed level when drawer is pulled out again. NOTES ON CLEANING Do not use abrasive detergents and brushes. Clean the surface of the appliance with a soft cloth with warm water and a mild detergent. Cleaning Agents After cooking some parts of appliance can get hot. To avoid stains appliance must be cooled down and dried with clean cloth or paper towels. Clean stains with a mild detergent. Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or other residue may cause fire. Keep the hood clean Grease filters can be washed in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance. Charcoal filter The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage. CLEANING THE GREASE FILTER Filters are mounted with the use of clips and pins on the opposite side. To clean the filter: 1. Press the handle of the mounting clip on the filter panel underneath the hood (1). 20