Zanussi ZFT11105WV User Manual - Page 10

Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre. LEVELLING When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front. ensured by one or more adjustable feet at the base of the cabinet. 100 mm 15 mm 15 mm DOOR REVERSIBILITY WARNING! Before carrying out any operations, remove the plug from the power socket. CAUTION! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. 1. Tilt back the appliance carefully so that the compressor cannot touch the floor. 2. Unscrew both adjustable feet. LOCATION It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation. The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is 3. Unscrew the screws of the door bottom hinge. 4. Take off the appliance door by pulling it slightly downwards. 5. Unscrew the top door hinge pin of the appliance then screw it back on the other side. 10