Zanussi ZNLN18FS1 User Manual - Page 5
Installation
View all Zanussi ZNLN18FS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CARE AND CLEANING WARNING! Risk of injury or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit. • Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance. SERVICE • To repair the appliance contact the Authorised Service Centre. Use original spare parts only. • Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee. • The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed INSTALLATION circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models. • Door gaskets will be available for 10 years after the model has been discontinued. DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door to prevent children and pets to be closed inside of the appliance. • The refrigerant circuit and the insulation materials of this appliance are ozone-friendly. • The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly. • Do not cause damage to the part of the cooling unit that is near the heat exchanger. WARNING! Refer to Safety chapters. WARNING! Refer to installation instruction document to install your appliance. WARNING! Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance. 5