Zanussi ZOCND7X1 User Manual - Page 3
Safety Instructions
View all Zanussi ZOCND7X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. • Always use oven gloves to remove or put in accessories or ovenware. • Before carrying out any maintenance, disconnect the appliance from the power supply. • WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. • If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. • To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence. • The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. SAFETY INSTRUCTIONS INSTALLATION WARNING! Only a qualified person must install this appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Do not pull the appliance by the handle. • Install the appliance in a safe and suitable place that meets installation requirements. • Keep the minimum distance from other appliances and units. • Before mounting the appliance, check if the oven door opens without restraint. • The appliance is equipped with an electric cooling system. It must be operated with the electric power supply. Cabinet minimum height (Cabinet under the worktop minimum height) 580 (600) mm Cabinet width 560 mm Cabinet depth 550 (550) mm Height of the front of the appliance 589 mm 3