Zanussi ZWJ14591W Product Manaul - Page 20

Problem Spinning starts late or the machine does not spin: The machine makes an unusual noise: No water is visible in the drum: Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme. • Redistribute the laundry. The load is too small. • Add more items, redistribute the load manually and then select the spinning programme. The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. Machines based on modern technology operate very economically using very little water without affecting performance. If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod Prod. No Ser. No ProMdo.d.N..o.. ... ... ... ... . . Ser. No Technical data Dimensions Width / Height / Depth Electrical connection Voltage Overall power Fuse Frequency Water supply pressure Minimum Maximum Level of protection against ingress of solid particles and moisture Water supply 1) Maximum Load Cotton Spin Speed Maximum 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Consumption values 20 60 / 85 / 60 mm 220-240 V 2050 W 13 A 50 Hz 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) IPX4 Cold water 8 kg 1200 rpm (ZWJ 12591 W) 1400 rpm (ZWJ 14591 W) www.zanussi.com