Zenith DVT723 Operation Guide - Page 16

VCR Operation Setup (Continued) VCR Setup Menu Options 1 Press MENU and the MAIN menu will appear. 2 Use v/V to select the SETUP menu, then press MEMORY/ENTER. The SETUP menu will appear. 3 Use v/V to choose a desired option on the SETUP menu. Then use b/B to choose a desired setting. FUNCTION OSD The on-screen display of this unit can be turned on or off. • FUNCTION OSD: Choose ON and OFF with b/B. AUDIO MODE The unit has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a unit that does not have VHS Hi-Fi. • AUDIO MODE: Choose HI-FI or NORMAL with b/B. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT. This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels. • AUDIO OUTPUT: Choose STEREO, LEFT, or RIGHT with b/B. 4 Press MENU when finished. 16