Zenith DVT723 Operation Guide - Page 24

VCR Operation (Continued) Dubbing and Editing If you wish to edit or dub your camcorder (or another VCR) recordings to this unit, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. These direct A/V jacks will also provide better picture results than using the RF jack on the rear panel. 1 Connect the camcorder's (or another VCR's) A/V outputs to your unit as illustrated on page 12. 2 Set the input channel "LINE2". (Use INPUT to select LINE2.) • If you have connected your unit to the A/V input jacks on the rear of unit, you should select the input channel LINE1 by pressing INPUT twice. 3 Play the tape in the camcorder (or another VCR). If you have a TV attached to your unit, you can see the video playing. 4 When you desire the recording to begin, press unit's REC/ITR (z) once to start. otes • Before recording, please confirm the recording start position. • To stop the editing, press STOP (x) twice. Copying from DVD to VCR VHS Hi-Fi Stereo System This unit is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. 1 Set the AUDIO MODE option to Hi-Fi on the SETUP menu . 2 Set the AUDIO OUTPUT option to STEREO position. (STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel sound (R) is heard from the right speaker. (LEFT) POSITION: The left channel sound (L) is heard from both speakers. (RIGHT) POSITION: The right channel sound (R) is heard from both speakers. This unit is capable of copying the contents of a DVD to a VHS tape. ote If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. "LOCK" is displayed in the display window. 1 Insert Disc. Insert the disc you wish to copy in the DVD deck and close the disc tray. 2 Insert VHS Tape. Insert a blank VHS video tape into the VCR deck. 3 Press PLAY ( B) on the DVD deck. The DVD will go into play mode • If the DVD disc menu appears, you may need to press PLAY ( B) manually to begin copying. 4 Press REC/ITR (z) on the front panel or remote control. • The unit will go into Record mode. • "COPY" indicator will light. 3 Press MENU. 4 Insert a cassette and press PLAY ( B). Adjust volume at your stereo system. 5 Stop the Copy Process. When the DVD is finished playing, press STOP (x) or POWER twice to end copying. You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again. ote When you stop the DVD playback during copying, VCR recording mode also stops automatically. 24