Zenith R40W46 Operation Guide - Page 28

Antenna Connections Combination VHF/UHF Antennas 300 ohm Flat Wire 300 to 75 ohm Adapter TV rear 75 ohm Antenna Jack 75 ohm Coaxial Cable 75 ohm CATV Cable 300 to 75 ohm Adapter 300 ohm Flat Wire Connecting an Outdoor Antenna For the best signal reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality. Before connecting an outdoor antenna, inspect it yourself or have a TV technician inspect it. Any service center can explain the various outdoor antenna options available to you. 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire to screws on the 300 ohm to 75 ohm adapter. 2. Push the end of 300 ohm to 75 ohm adapter onto 75 ohm antenna jack. 75 Ohm Coaxial Cable 1. Connect the 75 ohm coaxial cable directly to the 75 ohm antenna jack. Connecting a CATV Cable If you subscribe to a CATV system, use the antenna connection described below. 1. 75 ohm Antenna Jack 2. 300 to 75 ohm Adapter 75 ohm CATV Cable from cable TV source 1. Remove the 300 to 75 ohm adapter or the cable from the set if attached. 2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack. 28 Downloaded from www.Manualslib.com manuals search engine