Zenith SL-4132-MW User Guide - Page 1

Motion Sensing Coach Lights Requirements • The light control requires 120 volts AC. • If you want to use Manual Mode, the control must be wired through a switch. • Some electrical codes require installa- tion by a qualified electrician. Features • Light comes on when motion is detected. • Automatically turns light off. • Photocell keeps the light off during daylight hours. This package includes: OPERATION Mode: Test Auto Manual On-Time Works: Day 5 Seconds x 1, 5, or 10 Min To Dawn* Night x x x * resets to Auto Mode at dawn. NOTE: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate. TEST Set the ON-TIME switch ON-TIME on the bottom of the cover plate to TEST. TEST 1 5 10 MIN Carriage Light or Lantern or Coach Light AUTO Set ON-TIME switch to 1, 5, or 10 minutes. ON-TIME TEST 1 5 10 MIN Mounting screws and wire connectors * Model 4162 includes additional top assembly parts. Tail Assembly (Lantern & Coach)* Before installation, record the model number from back of fixture below. Attach receipt in case of possible warranty issues. MANUAL MODE Manual mode only works at night because daylight returns the sensor to AUTO. Flip the light switch off for one second then back on to toggle 1 Second between AUTO and MANUAL OFF then... MODE. Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position. ... back on. © 2007 HeathCo LLC 595-5530-13