Zenith Z20LCD1 Operation Guide - Page 15

Inst_ llatjon After setup, be sure to select PC source on TV. Connections i. Set the monitor output _lution on the PC before co.nnecting to the TV. 2. Connect the TV to the PC with me PC cable. 3. Connect the piC audio outputto the TV's PC SOUND input: Viewing Setup I. Turn on the PC. 2. Use the PC burn on the remote control to select PC. Monitor Dis play S pecifications MODE Resolution VGA 640x480 Horizon_l Vertical Frequency(kHz) Frequency(Hz) 31.4 60 SVGA 800x600 37.8 60 XGA 1024x768 48.3 60 NOTE S a. For o_um picture quality; use sta_rd 1024x768@ 6OHz computer output _a6OHz refresh ra_. Using other _rn'_ts (VGA, SVGA, etc.) or refresh _tes may result in reduced p_tureq_lity. No change the computer vi_o output _mat, please refer to the operating manual _r _ecompu_r you are using). b. if the message "lnputOutofrange"appears on _e screen, adjust_e PC output to a format listed in the 'Monitor Dis play S pecifica tions' c ha rt a bore. c. The synchronization input form for Hodzon_l and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automa_cally switches to DPM mode. If you don'tuse the PC cable provided, DPM mode may not work. /5