Zenith ZHD311 Operation Guide - Page 26
Operation, Radio, Presetting, radio, stations, Listening
View all Zenith ZHD311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Operation with Radio Presetting the radio stations Listening to the radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Press BAND on the Remote Control until FM or AM (MW) appears in the display window. 2 And then every time you press BAND, FM and AM (MW) changes alternately. 3 Press and hold TUNING 144 N NI on the front panel for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD/CD Receiver tunes in a station. "TUNED" and "STEREO" (for stereo program) appear in the display window. Press PROGJMEMO. on the Remote Control. °IF A preset number will flash in the display window. 5Press PR(A/V) on the Remote Control to select the preset number you want. I Press PROGJMEMO. on the Remote Control again. The station is stored. Repeat steps 3 to 6 to store other stations. Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). 1Press BAND until AM (MW) or FM appears in the display window. The last received station is tuned in. " Press PR(A/Y) repeatedly on the Remote Control to select the preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the Remote Control repeatedly. To turn off the radio Press POWER to turn the DVD/CD Receiver off or select another function mode (DVD/CD, AV 1, etc.,). To listen to non-preset radio stations • Use manual or automatic tuning in step 2. • For manual tuning, press TUN- 4 or TUN+ ► on the Remote Control repeatedly. • For automatic tuning, press and hold TUN- 4 or TUN+ ► for about two seconds on the Remote Control. To tune in a station with a weak signal Press TUNING 44 44 or N NI repeatedly in step 3 to tune in the station manually. To clear all the stored stations Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the display window and then press PROG./MEMO. again, the stations are cleared. • If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to mode. To select a preset radio station directly You can use the number buttons on the Remote Control to select a preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 (within 3 seconds). For your reference • If an FM program is noisy Press MONO/ST. on the front panel so that "ST." disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve reception Reorient the supplied antennas. ote If all stations have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 5-6 as above.