ZyXEL ARMOR Z2 User Guide - Page 89
LABEL, DESCRIPTION, Network > NAT > Application
View all ZyXEL ARMOR Z2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 10 Network Address Translation Figure 58 Network > NAT > Application The following table describes the labels on this screen. Table 32 Network > NAT > Application LABEL DESCRIPTION Add Application Rule Application Name Select an option from the drop-down list to choose a pre-defined service. The pre-defined service port number(s) and protocol will display in the fields below. User-Defined Type a name (of up to 31 printable characters) to identify this rule. Otherwise, select a Application Name predefined service in the Application Name drop-down list. Protocol Select the transport layer protocol used for the service. Choices are TCP, and UDP. Public Port Range Type a port number(s) to be forwarded. Local Port Range To specify a range of ports, enter a colon (:) between the first port and the last port, such as 10:20. Server IP Address Type the inside IP address of the server that receives packets from the port(s) specified in the Port field. Apply Click Apply to save your changes to the Application Rules Summary table. Reset Click Reset to not save and return your new changes in the Service Name and Port fields to the previous one. Application Rules Summary Application Name This field displays a name to identify this rule. Server IP Address This field displays the inside IP address of the server. Protocol This field displays the transport layer protocol supported by this server. NBG6615's User's Guide 89