ZyXEL ES-2024PWR User Guide - Page 227
Reboot System, Firmware Upgrade
View all ZyXEL ES-2024PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Chapter 28 Maintenance Note: Clicking the Apply or Add button does NOT save the changes permanently. All unsaved changes are erased after you reboot the Switch. 28.4 Reboot System Reboot System allows you to restart the Switch without physically turning the power off. The Switch loads configuration one (Config 1) when you reboot. Follow the steps below to reboot the Switch. 1 In the Maintenance screen, click the Config 1 button next to Reboot System to reboot and load configuration one. The following screen displays. Figure 122 Reboot System: Confirmation 2 Click OK again and then wait for the Switch to restart. This takes up to two minutes. This does not affect the Switch's configuration. 28.5 Firmware Upgrade Make sure you have downloaded (and unzipped) the correct model firmware and version to your computer before uploading to the device. Be sure to upload the correct model firmware as uploading the wrong model firmware may damage your device. From the Maintenance screen, display the Firmware Upgrade screen as shown next. Figure 123 Management > Maintenance > Firmware Upgrade ES-2024 Series User's Guide 227