ZyXEL ES-3148 User Guide - Page 285

Login, I cannot Telnet to the Switch.

Page 285 highlights

Chapter 37 Troubleshooting 7 If the problem continues, contact the vendor. V I can see the Login screen, but I cannot log in to the Switch. 1 Make sure you have entered the user name and password correctly. The default user name is admin, and the default password is 1234. These fields are case-sensitive, so make sure [Caps Lock] is not on. 2 You cannot log in to the web configurator while someone is using the Telnet or the console port to access the Switch. Log out of the Switch in the other session, or ask the person who is logged in to log out. 3 Disconnect and re-connect the power adaptor or cord to the Switch. 4 If this does not work, you have to reset the Switch to its factory defaults. See Section 4.6 on page 59. V I cannot Telnet to the Switch. See the troubleshooting suggestions for I cannot see or access the Login screen in the web configurator. Ignore the suggestions about your browser. In addition, consider the following suggestions before you reset the Switch to its factory defaults. 1 You may have exceeded the maximum number of concurrent Telnet sessions. Close other Telnet sessions, or try connecting again later. 2 Try to access the Switch using another service, such as HTTP. If you can access the Switch, check the remote management and secure client settings to find out why the Switch does not respond to Telnet. V I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload new firmware. See the troubleshooting suggestions for I cannot see or access the Login screen in the web configurator. Ignore the suggestions about your browser. In addition, consider the following suggestions before you reset the Switch to its factory defaults. 1 You may have exceeded the maximum number of concurrent FTP sessions. Close other FTP sessions, or try connecting again later. 2 Try to access the Switch using another service, such as HTTP. If you can access the Switch, check the remote management and secure client settings to find out why the Switch does not respond to FTP. ES-3148 User's Guide 285

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362

Chapter 37 Troubleshooting
ES-3148 User’s Guide
285
7
If the problem continues, contact the vendor.
I can see the
Login
screen, but I cannot log in to the Switch.
1
Make sure you have entered the user name and password correctly. The default user
name is
admin
, and the default password is
1234
. These fields are case-sensitive, so
make sure [Caps Lock] is not on.
2
You cannot log in to the web configurator while someone is using the Telnet or the
console port to access the Switch. Log out of the Switch in the other session, or ask the
person who is logged in to log out.
3
Disconnect and re-connect the power adaptor or cord to the Switch.
4
If this does not work, you have to reset the Switch to its factory defaults. See
Section 4.6
on page 59
.
I cannot Telnet to the Switch.
See the troubleshooting suggestions for
I cannot see or access the Login screen in the web
configurator.
Ignore the suggestions about your browser. In addition, consider the following
suggestions before you reset the Switch to its factory defaults.
1
You may have exceeded the maximum number of concurrent Telnet sessions. Close
other Telnet sessions, or try connecting again later.
2
Try to access the Switch using another service, such as HTTP. If you can access the
Switch, check the remote management and secure client settings to find out why the
Switch does not respond to Telnet.
I cannot use FTP to upload / download the configuration file. / I cannot use
FTP to upload new firmware.
See the troubleshooting suggestions for
I cannot see or access the Login screen in the web
configurator.
Ignore the suggestions about your browser. In addition, consider the following
suggestions before you reset the Switch to its factory defaults.
1
You may have exceeded the maximum number of concurrent FTP sessions. Close other
FTP sessions, or try connecting again later.
2
Try to access the Switch using another service, such as HTTP. If you can access the
Switch, check the remote management and secure client settings to find out why the
Switch does not respond to FTP.