ZyXEL ES-4124 User Guide - Page 341
Enable Mode
View all ZyXEL ES-4124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Chapter 45 Introducing Commands Table 139 Command Summary: User Mode (continued) COMMAND DESCRIPTION PRIVILEGE enable Accesses Enable (or privileged) mode. See 0 Section 45.12.2 on page 341. Enable the highest privilege level for executing commands. Accesses Enable mode commands up to the 0 privilege level specified. See Section 45.12.2 on page 341. show ip Displays IP related information. 0 hardware-monitor Displays current hardware monitor information with 0 the specified temperature unit (Celsius C or Fahrenheit F). system-information Displays general system information. 0 alarm-status Display which alarms are enabled on the Switch as 0 well as the LED status of the alarms. cpu-utilization Display statistics about the utilization of the CPU 0 on the Switch. version flash Display the version of the currently installed 0 firmware on the flash memory. version Display the version of the currently running 0 firmware on the Switch. ping Sends Ping request to an Ethernet device. 0 [vlan ] [size ] [-t] Sends Ping request to an Ethernet device in the 0 specified VLAN(s) with the specified parameters. help Displays command help information. 0 traceroute Determines the path a packet takes to a device. 0 [vlan ] [ttl ] [wait ] [queries ] Determines the path a packet takes to a device in a 0 VLAN. help Displays command help information. 0 ssh Connects to an SSH server with the specified SSH 0 version. 45.12.2 Enable Mode The following table describes the commands available for Enable mode. Table 140 Command Summary: Enable Mode COMMAND DESCRIPTION PRIVILEGE baudrate Changes the console port speed. 13 Choices are 1 (9600), 2 (19200), 3(38400), 4 (57600) and 5 (115200). boot config Restarts the system with the 13 specified configuration file. ES-4124 User's Guide 341