ZyXEL EX3510 User Guide - Page 98
Network Setting > Wireless > WPS, Apply, LABEL, DESCRIPTION
![]() |
View all ZyXEL EX3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 7 Wireless devices must support WPS. It is recommended to use the Push Button Configuration (PBC) method if your wireless client supports it. See Section 7.10.8.3 on page 112 for more information about WPS. Note: The Zyxel Device applies the security settings of the main SSID (SSID1) profile (see Section 7.2 on page 88). Note: If WPS is enabled, UPnP will automatically be turned on. Note: The WPS switch is grayed out when WiFi is disabled. Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and makes it turn blue. Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen. Figure 55 Network Setting > Wireless > WPS The following table describes the labels in this screen. Table 25 Network Setting > Wireless > WPS LABEL DESCRIPTION General WPS Click this switch to activate or deactivate WPS on this Zyxel Device. When the switch turns blue , the function is enabled. Otherwise, it is not. Add a new device with WPS Method Method 1 Use this section to set up a WPS wireless network using Push Button Configuration (PBC). Click this switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device. WPS Click this button to add another WPS-enabled wireless device (within wireless range of the Zyxel Device) to your wireless network. This button may either be a physical button on the outside of device, or a menu button similar to the WPS button on this screen. Note: You must press the other wireless device's WPS button within two minutes of pressing this button. EX3510-B0 User's Guide 98
![](/manual_guide/products/zyxel-ex3510b0-user-guide-ba15d2d/98.png)