ZyXEL FSG1100HN User Guide - Page 18
LAN 1-4, Button, 100Mbps Ethernet connection. - bridge
![]() |
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 2 The WPS Button LAN 1-4 WPS Button Off The FSG1100HN's power is off, it is in bridged mode, or a connection not present. Red On The FSG1100HN's attempt to achieve an IP connection failed (no DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, etc.). Green On The FSG1100HN has a successful 10/100Mbps Ethernet connection. Blinking The FSG1100HN is sending/receiving data through the LAN, flashing at 4 HZ with a 50% duty cycle. Off The LAN is not connected or the FSG1100HN is powered off. Press this button for 1 second to set up a wireless connection via WiFi Protected Setup with another WPS-enabled client. You must press the WPS button on the client side, holding the button for at least 5 seconds, for a successful connection. 18 FSG1100HN User's Guide
![](/manual_guide/products/zyxel-fsg1100hn-user-guide-a239516/18.png)