ZyXEL FSG1100HN User Guide - Page 58
LAN General Screen, Networking > LAN > General, Networking, > LAN > General
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 6 LAN 6.4 LAN General Screen The LAN window General tab allows users to configure and display LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same building or floor of a building. The LAN windows can help users configure a LAN DHCP server, manage IP addresses, and partition the physical network into logical networks. Click Networking > LAN > General to open the LAN screen. Networking > LAN > General The following table describes the LAN general labels in this screen. Networking > LAN > General LABEL DESCRIPTION LAN Settings IP Address Enter the (LAN) IP address of the FSG1100HN in dotted decimal notation 192.168.1.254 (factory default). Subnet Mask The subnet mask specifies the network number portion of an IP address. The FSG1100HN will automatically calculate the subnet mask based on the IP address assigned by the user. Unless a user is implementing subnetting, use the subnet mask computed by the FSG1100HN. Enter the subnet mask in dotted decimal notation. Default Gateway Enter a default gateway IP address. This is for use with a DHCP server (see the next field). DHCP Select Server, Client, or Disabled. If Server is selected, assign a range of IP addresses below in the DHCP Client Range fields and an IP address for the Default Gateway field above. DHCP Client Range When Server is selected, assign a range of contiguous IP addresses. Click Show Client to display the read-only Active DHCP Client Table displayed on the next page. Static DHCP Enable or Disable static DHCP. To set up static DHCP, 58 FSG1100HN User's Guide