ZyXEL GS1900 Series User Guide - Page 21
Hardware Installation
View all ZyXEL GS1900 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Hardware Installation and Connection 2.2 Hardware Installation See the following table for a comparison of the hardware installation methods of each GS1900 model: Table 2 GS1900 Series Installation Comparison Table MODEL HW Wall-mounting Rack-mounting Power ON/OFF Switch DESKTOP GS1900-8 GS1900-8HP GS1900-16 GS1900-24E V V V V V V V V V Note: Ask an authorized technician to attach the Switch to the rack/wall. For GS1900-8HP, GS1900-16 and GS1900-24E, you can place the Switch directly on top of your desk or have it wall-mounted. For GS1900-16 and GS1900-24E, the size is suitable for rackmounting and you can refer to Section 2.2.2 on page 22 for instruction. Take note of the following: • The Switch should have a minimum 25 mm space around it for ventilation. • The Switch should be placed in a desk that has a level surface and that is able to support the weight of the Switch. To start using it, simply connect the power cables and turn on the Switch. 2.2.1 Wall Mounting Do the following to attach your Switch to a wall. See Table 3 on page 21 for how far apart to place the screws. Table 3 Distance between the centers of the holes for wall mounting MODEL DISTANCE GS1900-8 176 mm GS1900-8HP 176 mm GS1900-16 148 mm GS1900-24E 207 mm 1 Screw the two screws provided with your Switch into the wall (see the figure in step 2). Use screws with 6 mm ~ 8 mm (0.24" ~ 0.31") wide heads. Do not screw the screws all the way in to the wall; leave a small gap between the head of the screw and the wall. The gap must be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the Switch. Note: Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the Switch with the connection cables. GS1900 Series User's Guide 21