ZyXEL IPC3605N User Guide - Page 16
Initial Setup, 4.1 Adjusting the Focus - software
View all ZyXEL IPC3605N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Initial Setup Before running the setup utility, make sure you have the IP Camera properly connected. To begin setup, insert the installation CD supplied with the camera into the CD-ROM drive of the viewing PC, and the eaZy Wizard utility will start and guide you during the installation process of the hardware and software for your IP camera. 4.1 Adjusting the Focus After initial setup, the camera's focus will need to be adjusted. In order to adjust focus, aim the camera at the area you wish to monitor and gently turn the focus adjustment ring, located at the front of the camera. Turning the ring clockwise will move the focus farther away, while turning counterclockwise will move the focus closer. Important: Do not over-tighten the adjustment ring, as this may damage the unit.